Silicone-rubber base flame retardant adhesives

For fixing electronic devices, with outstanding electrical properties

  • Product name
  • Features
    • Non-corrosive single component adhesive which cures rapidly at room temperature, conforming to the MIL-A46146B corrosion test.
    • Excellent thermal dissipation performance, its thermal conductivity is five to ten times higher than that of traditional silicone resin.
    • Retains rubber elasticity and adhesiveness.

Product Lineup


Product name SC950
Main component Silicone rubber base
Property Non-liquidity paste
Color Gray
Solid content (wt%) 97% or more
Specific gravity About 1.3
Tack free time (23°C) Within 15 min
Container 130g tube
Warranty period from manufacturing date 14 months
  • *UL Certificated. File No. E63260 UL94 V-0 (t = 0.75 to 3.00mm)

・Bonding and sealing of high-voltage components or TV parts that require Frame retardancy.
・Sealing for waterproofing, dust proofing, and damping; mounting; and bonding in home electrical appliances, communication devices, or measuring instruments.
・General joining of metals, glasses or plastics.

1.Property after curing

Test Piece Condition

Curing condition:23°C±5°C 60±20%RH x 7days

Product name SC950
Specific gravity About 1.32
Hardness (Type A Durometer) 30 to 60
Tensile strength (N/cm2) 28
Elongation (%) 100 or more
Corrosion (MIL-A-46146B) No corrosion

2.Electrical property (Volume resistance, Dielectric breakdown voltage)

Test Piece Condition

Curing condition:23°C±5°C 60±20%RH x 7days

Product name SC950
Volume resistivity (Ω・m) 1.0X1010 or more
Dielectric breakdown voltage (kV/mm) 18 or more
Dielectric constant (ε) 1MHz JIS K6249 5.0 or less
Dielectric dissipation factor (tanδ) 1MHz JIS K6249 0.05 or less

3.Bonding strength on various type of substrate (Shear strength)

Test Piece Condition

Curing condition:23°C±5°C 60±20%RH x 7days
Coating thickness:1mm
Bonding area:20mm x 10mm
Measuring condition:23°C±5°C 60±20%RH
Peeling speed:10mm/min



Shear strength Substrate Product name
Aluminum 220
Stainless steel 200
Mild steel 200
Brass 200
Glass 220
Phenolic 180
Epoxy 220
Polyester 210
Polycarbonate 190
Polyethylene 90
ABS 230
Polyamide 200
Acrylic 100
PPS 190
PBT 180
Noryl 170
Rigid PVC 150
  • The product does not induce cracks, corrosion or any other adverse effects in the bonded material.


Please read notes indicated on the relevant safety data sheet(SDS) for precautions required for operation.


Note on the characteristic data given - Data on the characteristics of the products described in this page based on the results of evaluations carried out by the company. This does not guarantee that the characteristics of the product conform with your usage environment. Before use, review the usage conditions based on evaluation data obtained from the equipment and substrates actually used.

Product Lineup